For the final project I chose to make a skirt for my mom. I chose to use linen for skirt so it was breathable in the summer, and I chose linen over cotton just so I wouldn’t have to add a slip layer if because most of the cotton fabrics were see through.
I found a tutorial for a half circle skirt and followed it accordingly so I wouldn’t buy too much fabric as I had done for my iteration project and wouldn’t be “winging it”.
I first started with cutting out my fabric. Since the measurements were very exact (math and radii were involved) and the skirt was very long I used measuring tape and chalk in a way I never thought I would.
Afterwards I started the sewing process. This was a bad idea because when it came time to print the design on my fabric, I had to wait for the paint to dry before flipping my skirt around and print on the backside rather than just print on the separate pieces and then sew them together.
My original plan was to have embroidered flowers on the bottom of the skirt but the spacing of the prints was so close together that I decided that big embroidery would just crowd the skirt and make it too busy. My original idea was also to include buttons but I also didn’t end up doing this because of the same reason. The skirt looked very incomplete without anything so I wanted to do a border along the edge because I knew it wouldn’t disrupt the flow of the skirt or make it look too busy and unwearable.
In this project I learned how to do a hidden hem with the blind stitch foot but because I was dumb I didn’t realized that my white bobbin thread was showing on the front of the skirt so I tried to cover it with the satin stitch I used for the border but I couldn’t make the width of the stitch smaller to cover the hidden stitch as the fabric kept getting caught in the machine.
By the end of this project I learned so many new skills and learned to make a clean finished product without and compromises to quality. I first started out this semester with a jean skirt that I will never wear because I’m too afraid it’ll rip every time I sit down. Now I’ve made a skirt I’m confident my mom can do whatever she wants in.
By following the tutorial and applying all the skills I learned from my iteration project and the new techniques I learned from my TA, Duncan, I was able to create a something I would proudly say I made and give my mom. Working with a plan and a design in my head and on a schedule, I made something that I think is very high quality.