For organizations with dedicated facility space and staff. Requires approximately $100,000 of seed funding for equipment, based on the model seen at the Museum of Science and Industry and other notable Fab Lab locations.
For organizations with part-time staff and volunteers with shared space access, requiring around $10,000 (+ computers) of seed funding. Based on our model.
Print Material: PLA plastic
Max Print Dimensions: 5″ x 5″ x 5″
Slicing Software: FlashPrint
Preferred File Type: STL
Cost:
$2 | 13 grams or less
$0.15 per gram | over 13 grams
3D FDM PRINTS ARE PRICED BY WEIGHT (IN GRAMS)
Monday: 5-9PM
Tuesday: 10AM-1PM, 5-9PM
Wednesday: 5-9PM
Thursday: 10AM-1PM, 5-9PM
Sunday: 1-6PM
This fall we’re welcoming back all community and university members. Stop in and create with us!
Masks Required | Appointments Recommended
Print Material: PLA plastic
Max Print Dimensions: 8″ x 8″ x 8″
Slicing Software: Cura
Preferred File Type: STL
Cost:
$2 | 13 grams or less
$0.15 per gram | over 13 grams
3D FDM PRINTS ARE PRICED BY WEIGHT (IN GRAMS)
Print Material: UV Resin
Max Print Dimensions: 4.5″ x 2.5″ x 6″
Slicing Software: ChituBox
Preferred File Type: STL
Cost:
$5 | 20 mL or less
$0.25 per mL | over 20 mL
3D SLA PRINTS ARE PRICED BY VOLUME (IN ML). THESE PRINTS REQUIRE ADDITIONAL PROCESSING WITH CURING AND CLEANING.
Power and Type: 40 Watt, CO2
Max Bed Dimensions: 18″ x 32″
Max Cut thickness: 1/4″
File Creation Software: Inkscape, Adobe Illustrator, or other vector software
Preferred File Type: SVG to PDF
Laserable Materials: wood, acrylic,
See Additional Materials
Cost:
$7 | per 30 min appointment
ROTARY TOOL ATTACHMENT AVAILABLE
Power And Type: 60 Watt, CO2
Max Bed Dimensions: 12″ X 24″
Max Cut Thickness: 1/8″
File Creation Software: Inkscape, Adobe Illustrator, Or Other Vector Software
Preferred File Type: SVG To PDF
Laserable Materials: Wood, Acrylic,
See Additional Materials
Cost:
$7 | per 30 min appointment
